Eradicating the need ...
for costly reinstatements and excavations, pipe burting is an effective and tidy way of replacing faulty and defective pipes without the traditional need to excavate a large trench. Working from manhole to manhole, pipe bursting can replace 100 metres of pipe a day, subject to soil and ground conditions.
Miniburst 20...
For 100mm or 150mm pipes working from manholes of approximately 1-meter size, the Miniburst will replace or upgrade up to 50m of pipe in one pull. The system can use either standard 6m and 12m lengths of MDPE pipe, or custom cut lengths for special applications i.e. 600mm snap fit pipes for working in confined areas. Fast and clean pipe upgrades up to 50% on size, i.e. 100mm to 150mm in one pass.
Miniburst major 50...
For long pulls of over 100m in a single pass on pipe sizes from 100mm, 150mm, 225mm, 300mm. Miniburst 50 combines the convenience of Miniburst 20 with the extra capacity for larger diameters and longer runs. The bursting of most material types even ductile can be achieved by the use of a magnesium steel alloy cutter. This system has up to 50 tons of pulling force and has been specially adapted for use in the most onerous ground conditions. Typical uses are sewer, clean water, gas, ducting, plastic, cast iron, salt glaze, and pitch fiber replacement |
|
